copies: cache the ancestor checking call when tracing copy A good share of the time spent in this function is spent doing ancestors checking. To avoid spending time in duplicated call, we cache the result of calls. In the slower case, this provide a quite significant performance boost. Below are the result for a set of selected pairs (many of them pathological): (And further down is another table that summarize the current state of filelog based vs changeset base copy tracing) The benchmark have been configured to be killed after 6 minutes of runtime, which mean that any detect slower than 2 minutes will be marked as "killed". This drop some useful information about how much slower these case are? but also prevent 99% of the benchmark time to be spent on case that can be labelled "very slow" anyway. Repo Case Source-Rev Dest-Rev Old-Time New-Time Difference Factor ------------------------------------------------------------------------------------------------------------------------------------ mercurial x_revs_x_added_0_copies ad6b123de1c7 39cfcef4f463 : 0.000044 s, 0.000044 s, +0.000000 s, ? 1.0000 mercurial x_revs_x_added_x_copies 2b1c78674230 0c1d10351869 : 0.000138 s, 0.000138 s, +0.000000 s, ? 1.0000 mercurial x000_revs_x000_added_x_copies 81f8ff2a9bf2 dd3267698d84 : 0.005067 s, 0.005052 s, -0.000015 s, ? 0.9970 pypy x_revs_x_added_0_copies aed021ee8ae8 099ed31b181b : 0.000218 s, 0.000219 s, +0.000001 s, ? 1.0046 pypy x_revs_x000_added_0_copies 4aa4e1f8e19a 359343b9ac0e : 0.000053 s, 0.000055 s, +0.000002 s, ? 1.0377 pypy x_revs_x_added_x_copies ac52eb7bbbb0 72e022663155 : 0.000125 s, 0.000128 s, +0.000003 s, ? 1.0240 pypy x_revs_x00_added_x_copies c3b14617fbd7 ace7255d9a26 : 0.001098 s, 0.001089 s, -0.000009 s, ? 0.9918 pypy x_revs_x000_added_x000_copies df6f7a526b60 a83dc6a2d56f : 0.017546 s, 0.017407 s, -0.000139 s, ? 0.9921 pypy x000_revs_xx00_added_0_copies 89a76aede314 2f22446ff07e : 0.096723 s, 0.094175 s, -0.002548 s, ? 0.9737 pypy x000_revs_x000_added_x_copies 8a3b5bfd266e 2c68e87c3efe : 0.271796 s, 0.238009 s, -0.033787 s, ? 0.8757 pypy x000_revs_x000_added_x000_copies 89a76aede314 7b3dda341c84 : 0.128602 s, 0.125876 s, -0.002726 s, ? 0.9788 pypy x0000_revs_x_added_0_copies d1defd0dc478 c9cb1334cc78 : 7.086742 s, 3.581556 s, -3.505186 s, ? 0.5054 pypy x0000_revs_xx000_added_0_copies bf2c629d0071 4ffed77c095c : 0.016634 s, 0.016721 s, +0.000087 s, ? 1.0052 pypy x0000_revs_xx000_added_x000_copies 08ea3258278e d9fa043f30c0 : 0.254225 s, 0.242367 s, -0.011858 s, ? 0.9534 netbeans x_revs_x_added_0_copies fb0955ffcbcd a01e9239f9e7 : 0.000166 s, 0.000165 s, -0.000001 s, ? 0.9940 netbeans x_revs_x000_added_0_copies 6f360122949f 20eb231cc7d0 : 0.000118 s, 0.000114 s, -0.000004 s, ? 0.9661 netbeans x_revs_x_added_x_copies 1ada3faf6fb6 5a39d12eecf4 : 0.000296 s, 0.000296 s, +0.000000 s, ? 1.0000 netbeans x_revs_x00_added_x_copies 35be93ba1e2c 9eec5e90c05f : 0.001137 s, 0.001124 s, -0.000013 s, ? 0.9886 netbeans x000_revs_xx00_added_0_copies eac3045b4fdd 51d4ae7f1290 : 0.014133 s, 0.013060 s, -0.001073 s, ? 0.9241 netbeans x000_revs_x000_added_x_copies e2063d266acd 6081d72689dc : 0.016988 s, 0.017112 s, +0.000124 s, ? 1.0073 netbeans x000_revs_x000_added_x000_copies ff453e9fee32 411350406ec2 : 0.676361 s, 0.660350 s, -0.016011 s, ? 0.9763 netbeans x0000_revs_xx000_added_x000_copies 588c2d1ced70 1aad62e59ddd : 12.515149 s, 10.032499 s, -2.482650 s, ? 0.8016 mozilla-central x_revs_x_added_0_copies 3697f962bb7b 7015fcdd43a2 : 0.000186 s, 0.000189 s, +0.000003 s, ? 1.0161 mozilla-central x_revs_x000_added_0_copies dd390860c6c9 40d0c5bed75d : 0.000459 s, 0.000462 s, +0.000003 s, ? 1.0065 mozilla-central x_revs_x_added_x_copies 8d198483ae3b 14207ffc2b2f : 0.000273 s, 0.000270 s, -0.000003 s, ? 0.9890 mozilla-central x_revs_x00_added_x_copies 98cbc58cc6bc 446a150332c3 : 0.001503 s, 0.001474 s, -0.000029 s, ? 0.9807 mozilla-central x_revs_x000_added_x000_copies 3c684b4b8f68 0a5e72d1b479 : 0.004862 s, 0.004806 s, -0.000056 s, ? 0.9885 mozilla-central x_revs_x0000_added_x0000_copies effb563bb7e5 c07a39dc4e80 : 0.088291 s, 0.085150 s, -0.003141 s, ? 0.9644 mozilla-central x000_revs_xx00_added_0_copies 6100d773079a 04a55431795e : 0.007113 s, 0.007064 s, -0.000049 s, ? 0.9931 mozilla-central x000_revs_x000_added_x_copies 9f17a6fc04f9 2d37b966abed : 0.004687 s, 0.004741 s, +0.000054 s, ? 1.0115 mozilla-central x000_revs_x000_added_x000_copies 7c97034feb78 4407bd0c6330 : 0.198710 s, 0.190133 s, -0.008577 s, ? 0.9568 mozilla-central x0000_revs_xx000_added_0_copies 9eec5917337d 67118cc6dcad : 0.036068 s, 0.035651 s, -0.000417 s, ? 0.9884 mozilla-central x0000_revs_xx000_added_x000_copies f78c615a656c 96a38b690156 : 0.465362 s, 0.440694 s, -0.024668 s, ? 0.9470 mozilla-central x00000_revs_x0000_added_x0000_copies 6832ae71433c 4c222a1d9a00 : 24.519684 s, 18.454163 s, -6.065521 s, ? 0.7526 mozilla-central x00000_revs_x00000_added_x000_copies 76caed42cf7c 1daa622bbe42 : 42.711897 s, 31.562719 s, -11.149178 s, ? 0.7390 mozilla-try x_revs_x_added_0_copies aaf6dde0deb8 9790f499805a : 0.001201 s, 0.001189 s, -0.000012 s, ? 0.9900 mozilla-try x_revs_x000_added_0_copies d8d0222927b4 5bb8ce8c7450 : 0.001216 s, 0.001204 s, -0.000012 s, ? 0.9901 mozilla-try x_revs_x_added_x_copies 092fcca11bdb 936255a0384a : 0.000595 s, 0.000586 s, -0.000009 s, ? 0.9849 mozilla-try x_revs_x00_added_x_copies b53d2fadbdb5 017afae788ec : 0.001856 s, 0.001845 s, -0.000011 s, ? 0.9941 mozilla-try x_revs_x000_added_x000_copies 20408ad61ce5 6f0ee96e21ad : 0.064936 s, 0.063822 s, -0.001114 s, ? 0.9828 mozilla-try x_revs_x0000_added_x0000_copies effb563bb7e5 c07a39dc4e80 : 0.090601 s, 0.088038 s, -0.002563 s, ? 0.9717 mozilla-try x000_revs_xx00_added_0_copies 6100d773079a 04a55431795e : 0.007510 s, 0.007389 s, -0.000121 s, ? 0.9839 mozilla-try x000_revs_x000_added_x_copies 9f17a6fc04f9 2d37b966abed : 0.004911 s, 0.004868 s, -0.000043 s, ? 0.9912 mozilla-try x000_revs_x000_added_x000_copies 1346fd0130e4 4c65cbdabc1f : 0.233231 s, 0.222450 s, -0.010781 s, ? 0.9538 mozilla-try x0000_revs_x_added_0_copies 63519bfd42ee a36a2a865d92 : 0.419989 s, 0.370675 s, -0.049314 s, ? 0.8826 mozilla-try x0000_revs_x_added_x_copies 9fe69ff0762d bcabf2a78927 : 0.401521 s, 0.358020 s, -0.043501 s, ? 0.8917 mozilla-try x0000_revs_xx000_added_x_copies 156f6e2674f2 4d0f2c178e66 : 0.179555 s, 0.145235 s, -0.034320 s, ? 0.8089 mozilla-try x0000_revs_xx000_added_0_copies 9eec5917337d 67118cc6dcad : 0.038004 s, 0.037606 s, -0.000398 s, ? 0.9895 mozilla-try x0000_revs_xx000_added_x000_copies 89294cd501d9 7ccb2fc7ccb5 : 52.838482 s, 7.382439 s, -45.456043 s, ? 0.1397 mozilla-try x0000_revs_x0000_added_x0000_copies e928c65095ed e951f4ad123a : 8.705874 s, 7.273506 s, -1.432368 s, ? 0.8355 mozilla-try x00000_revs_x00000_added_0_copies dc8a3ca7010e d16fde900c9c : 1.126708 s, 1.074593 s, -0.052115 s, ? 0.9537 mozilla-try x00000_revs_x0000_added_x0000_copies 8d3fafa80d4b eb884023b810 : 83.854020 s, 27.746195 s, -56.107825 s, ? 0.3309 Below is a table comparing the runtime of the current "filelog centric" algorithm, with the "changeset centric" one, we just modified. The changeset centric algorithm is a significant win in many scenario, but they are still various cases where it is quite slower. When many revision has to be considered the cost of retrieving the copy information, creating new dictionaries, merging dictionaries and checking if revision are ancestors of each other can slow things down. The rest of this series, will introduce a rust version of the copy tracing code to deal with most of theses issues. Repo Case Source-Rev Dest-Rev filelog sidedata Difference Factor --------------------------------------------------------------------------------------------------------------------------------------- mercurial x_revs_x_added_0_copies ad6b123de1c7 39cfcef4f463 : 0.000914 s, 0.000044 s, - 0.000870 s, ? 0.048140 mercurial x_revs_x_added_x_copies 2b1c78674230 0c1d10351869 : 0.001812 s, 0.000138 s, - 0.001674 s, ? 0.076159 mercurial x000_revs_x000_added_x_copies 81f8ff2a9bf2 dd3267698d84 : 0.017954 s, 0.005052 s, - 0.012902 s, ? 0.281386 pypy x_revs_x_added_0_copies aed021ee8ae8 099ed31b181b : 0.001509 s, 0.000219 s, - 0.001290 s, ? 0.145129 pypy x_revs_x000_added_0_copies 4aa4e1f8e19a 359343b9ac0e : 0.206881 s, 0.000055 s, - 0.206826 s, ? 0.000266 pypy x_revs_x_added_x_copies ac52eb7bbbb0 72e022663155 : 0.016951 s, 0.000128 s, - 0.016823 s, ? 0.007551 pypy x_revs_x00_added_x_copies c3b14617fbd7 ace7255d9a26 : 0.019096 s, 0.001089 s, - 0.018007 s, ? 0.057028 pypy x_revs_x000_added_x000_copies df6f7a526b60 a83dc6a2d56f : 0.762506 s, 0.017407 s, - 0.745099 s, ? 0.022829 pypy x000_revs_xx00_added_0_copies 89a76aede314 2f22446ff07e : 1.179211 s, 0.094175 s, - 1.085036 s, ? 0.079863 pypy x000_revs_x000_added_x_copies 8a3b5bfd266e 2c68e87c3efe : 1.249058 s, 0.238009 s, - 1.011049 s, ? 0.190551 pypy x000_revs_x000_added_x000_copies 89a76aede314 7b3dda341c84 : 1.614107 s, 0.125876 s, - 1.488231 s, ? 0.077985 pypy x0000_revs_x_added_0_copies d1defd0dc478 c9cb1334cc78 : 0.001064 s, 3.581556 s, + 3.580492 s, ? 3366.124060 pypy x0000_revs_xx000_added_0_copies bf2c629d0071 4ffed77c095c : 1.061275 s, 0.016721 s, - 1.044554 s, ? 0.015756 pypy x0000_revs_xx000_added_x000_copies 08ea3258278e d9fa043f30c0 : 1.341119 s, 0.242367 s, - 1.098752 s, ? 0.180720 netbeans x_revs_x_added_0_copies fb0955ffcbcd a01e9239f9e7 : 0.027803 s, 0.000165 s, - 0.027638 s, ? 0.005935 netbeans x_revs_x000_added_0_copies 6f360122949f 20eb231cc7d0 : 0.130014 s, 0.000114 s, - 0.129900 s, ? 0.000877 netbeans x_revs_x_added_x_copies 1ada3faf6fb6 5a39d12eecf4 : 0.024990 s, 0.000296 s, - 0.024694 s, ? 0.011845 netbeans x_revs_x00_added_x_copies 35be93ba1e2c 9eec5e90c05f : 0.052201 s, 0.001124 s, - 0.051077 s, ? 0.021532 netbeans x000_revs_xx00_added_0_copies eac3045b4fdd 51d4ae7f1290 : 0.037642 s, 0.013060 s, - 0.024582 s, ? 0.346953 netbeans x000_revs_x000_added_x_copies e2063d266acd 6081d72689dc : 0.197086 s, 0.017112 s, - 0.179974 s, ? 0.086825 netbeans x000_revs_x000_added_x000_copies ff453e9fee32 411350406ec2 : 0.935148 s, 0.660350 s, - 0.274798 s, ? 0.706145 netbeans x0000_revs_xx000_added_x000_copies 588c2d1ced70 1aad62e59ddd : 3.920674 s, 10.032499 s, + 6.111825 s, ? 2.558871 mozilla-central x_revs_x_added_0_copies 3697f962bb7b 7015fcdd43a2 : 0.024232 s, 0.000189 s, - 0.024043 s, ? 0.007800 mozilla-central x_revs_x000_added_0_copies dd390860c6c9 40d0c5bed75d : 0.141483 s, 0.000462 s, - 0.141021 s, ? 0.003265 mozilla-central x_revs_x_added_x_copies 8d198483ae3b 14207ffc2b2f : 0.025775 s, 0.000270 s, - 0.025505 s, ? 0.010475 mozilla-central x_revs_x00_added_x_copies 98cbc58cc6bc 446a150332c3 : 0.084922 s, 0.001474 s, - 0.083448 s, ? 0.017357 mozilla-central x_revs_x000_added_x000_copies 3c684b4b8f68 0a5e72d1b479 : 0.194784 s, 0.004806 s, - 0.189978 s, ? 0.024673 mozilla-central x_revs_x0000_added_x0000_copies effb563bb7e5 c07a39dc4e80 : 2.161103 s, 0.085150 s, - 2.075953 s, ? 0.039401 mozilla-central x000_revs_xx00_added_0_copies 6100d773079a 04a55431795e : 0.089347 s, 0.007064 s, - 0.082283 s, ? 0.079063 mozilla-central x000_revs_x000_added_x_copies 9f17a6fc04f9 2d37b966abed : 0.732171 s, 0.004741 s, - 0.727430 s, ? 0.006475 mozilla-central x000_revs_x000_added_x000_copies 7c97034feb78 4407bd0c6330 : 1.157287 s, 0.190133 s, - 0.967154 s, ? 0.164292 mozilla-central x0000_revs_xx000_added_0_copies 9eec5917337d 67118cc6dcad : 6.726568 s, 0.035651 s, - 6.690917 s, ? 0.005300 mozilla-central x0000_revs_xx000_added_x000_copies f78c615a656c 96a38b690156 : 3.266229 s, 0.440694 s, - 2.825535 s, ? 0.134924 mozilla-central x00000_revs_x0000_added_x0000_copies 6832ae71433c 4c222a1d9a00 : 15.860534 s, 18.454163 s, + 2.593629 s, ? 1.163527 mozilla-central x00000_revs_x00000_added_x000_copies 76caed42cf7c 1daa622bbe42 : 20.450475 s, 31.562719 s, +11.112244 s, ? 1.543373 mozilla-try x_revs_x_added_0_copies aaf6dde0deb8 9790f499805a : 0.080442 s, 0.001189 s, - 0.079253 s, ? 0.014781 mozilla-try x_revs_x000_added_0_copies d8d0222927b4 5bb8ce8c7450 : 0.497672 s, 0.001204 s, - 0.496468 s, ? 0.002419 mozilla-try x_revs_x_added_x_copies 092fcca11bdb 936255a0384a : 0.021183 s, 0.000586 s, - 0.020597 s, ? 0.027664 mozilla-try x_revs_x00_added_x_copies b53d2fadbdb5 017afae788ec : 0.230991 s, 0.001845 s, - 0.229146 s, ? 0.007987 mozilla-try x_revs_x000_added_x000_copies 20408ad61ce5 6f0ee96e21ad : 1.118461 s, 0.063822 s, - 1.054639 s, ? 0.057062 mozilla-try x_revs_x0000_added_x0000_copies effb563bb7e5 c07a39dc4e80 : 2.206083 s, 0.088038 s, - 2.118045 s, ? 0.039907 mozilla-try x000_revs_xx00_added_0_copies 6100d773079a 04a55431795e : 0.089404 s, 0.007389 s, - 0.082015 s, ? 0.082647 mozilla-try x000_revs_x000_added_x_copies 9f17a6fc04f9 2d37b966abed : 0.733043 s, 0.004868 s, - 0.728175 s, ? 0.006641 mozilla-try x000_revs_x000_added_x000_copies 1346fd0130e4 4c65cbdabc1f : 1.163367 s, 0.222450 s, - 0.940917 s, ? 0.191212 mozilla-try x0000_revs_x_added_0_copies 63519bfd42ee a36a2a865d92 : 0.085456 s, 0.370675 s, + 0.285219 s, ? 4.337612 mozilla-try x0000_revs_x_added_x_copies 9fe69ff0762d bcabf2a78927 : 0.083601 s, 0.358020 s, + 0.274419 s, ? 4.282485 mozilla-try x0000_revs_xx000_added_x_copies 156f6e2674f2 4d0f2c178e66 : 7.366614 s, 0.145235 s, - 7.221379 s, ? 0.019715 mozilla-try x0000_revs_xx000_added_0_copies 9eec5917337d 67118cc6dcad : 6.664464 s, 0.037606 s, - 6.626858 s, ? 0.005643 mozilla-try x0000_revs_xx000_added_x000_copies 89294cd501d9 7ccb2fc7ccb5 : 7.467836 s, 7.382439 s, - 0.085397 s, ? 0.988565 mozilla-try x0000_revs_x0000_added_x0000_copies e928c65095ed e951f4ad123a : 9.801294 s, 7.273506 s, - 2.527788 s, ? 0.742097 mozilla-try x00000_revs_x_added_0_copies 6a320851d377 1ebb79acd503 : 0.091886 s, killed mozilla-try x00000_revs_x00000_added_0_copies dc8a3ca7010e d16fde900c9c : 26.491140 s, 1.074593 s, -25.416547 s, ? 0.040564 mozilla-try x00000_revs_x_added_x_copies 5173c4b6f97c 95d83ee7242d : 0.092863 s, killed mozilla-try x00000_revs_x000_added_x_copies 9126823d0e9c ca82787bb23c : 0.226823 s, killed mozilla-try x00000_revs_x0000_added_x0000_copies 8d3fafa80d4b eb884023b810 : 18.914630 s, 27.746195 s, + 8.831565 s, ? 1.466917 mozilla-try x00000_revs_x00000_added_x0000_copies 1b661134e2ca 1ae03d022d6d : 21.198903 s, killed mozilla-try x00000_revs_x00000_added_x000_copies 9b2a99adc05e 8e29777b48e6 : 24.952268 s, killed Differential Revision: https://phab.mercurial-scm.org/D9296

#require svn svn-bindings

  $ filter_svn_output () {
  >     egrep -v 'Committing|Updating|(^$)' | sed -e 's/done$//' || true
  > }

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > [convert]
  > svn.trunk = mytrunk
  > EOF

  $ svnadmin create svn-repo
  $ SVNREPOPATH=`pwd`/svn-repo
  $ SVNREPOURL="`"$PYTHON" $TESTDIR/svnurlof.py \"$SVNREPOPATH\"`"
  $ INVALIDREVISIONID=svn:x2147622-4a9f-4db4-a8d3-13562ff547b2/proj%20B/mytrunk@1
  $ VALIDREVISIONID=svn:a2147622-4a9f-4db4-a8d3-13562ff547b2/proj%20B/mytrunk/mytrunk@1

Now test that it works with trunk/tags layout, but no branches yet.

Initial svn import

  $ mkdir projB
  $ cd projB
  $ mkdir mytrunk
  $ mkdir tags
  $ cd ..

  $ svn import -m "init projB" projB "$SVNREPOURL/proj%20B" | filter_svn_output | sort
  Adding         projB/mytrunk
  Adding         projB/tags
  Committed revision 1.

Update svn repository

  $ svn co "$SVNREPOURL/proj%20B/mytrunk" B | filter_svn_output
  Checked out revision 1.
  $ cd B
  $ echo hello > 'letter .txt'
  $ svn add 'letter .txt' | filter_svn_output
  A         letter .txt
  $ svn ci -m hello | filter_svn_output
  Adding         letter .txt
  Transmitting file data .
  Committed revision 2.

  $ svn-safe-append.py world 'letter .txt'
  $ svn ci -m world | filter_svn_output
  Sending        letter .txt
  Transmitting file data .
  Committed revision 3.

  $ svn copy -m "tag v0.1" "$SVNREPOURL/proj%20B/mytrunk" "$SVNREPOURL/proj%20B/tags/v0.1" | filter_svn_output
  Committed revision 4.

  $ svn-safe-append.py 'nice day today!' 'letter .txt'
  $ svn ci -m "nice day" | filter_svn_output
  Sending        letter .txt
  Transmitting file data .
  Committed revision 5.
  $ cd ..

Convert to hg once and also test localtimezone option

NOTE: This doesn't check all time zones -- it merely determines that
the configuration option is taking effect.

An arbitrary (U.S.) time zone is used here.  TZ=US/Hawaii is selected
since it does not use DST (unlike other U.S. time zones) and is always
a fixed difference from UTC.

  $ TZ=US/Hawaii hg convert --config convert.localtimezone=True "$SVNREPOURL/proj%20B" B-hg
  initializing destination B-hg repository
  scanning source...
  sorting...
  converting...
  3 init projB
  2 hello
  1 world
  0 nice day
  updating tags

Update svn repository again

  $ cd B
  $ svn-safe-append.py "see second letter" 'letter .txt'
  $ echo "nice to meet you" > letter2.txt
  $ svn add letter2.txt | filter_svn_output
  A         letter2.txt
  $ svn ci -m "second letter" | filter_svn_output
  Sending        letter .txt
  Adding         letter2.txt
  Transmitting file data ..
  Committed revision 6.

  $ svn copy -m "tag v0.2" "$SVNREPOURL/proj%20B/mytrunk" "$SVNREPOURL/proj%20B/tags/v0.2" | filter_svn_output
  Committed revision 7.

  $ svn-safe-append.py "blah-blah-blah" letter2.txt
  $ svn ci -m "work in progress" | filter_svn_output
  Sending        letter2.txt
  Transmitting file data .
  Committed revision 8.
  $ cd ..

  $ hg convert -s svn "$SVNREPOURL/proj%20B/non-existent-path" dest
  initializing destination dest repository
  abort: no revision found in module /proj B/non-existent-path
  [255]

########################################

Test incremental conversion

  $ TZ=US/Hawaii hg convert --config convert.localtimezone=True "$SVNREPOURL/proj%20B" B-hg
  scanning source...
  sorting...
  converting...
  1 second letter
  0 work in progress
  updating tags

  $ cd B-hg
  $ hg log -G --template '{rev} {desc|firstline} date: {date|date} files: {files}\n'
  o  7 update tags date: * +0000 files: .hgtags (glob)
  |
  o  6 work in progress date: * -1000 files: letter2.txt (glob)
  |
  o  5 second letter date: * -1000 files: letter .txt letter2.txt (glob)
  |
  o  4 update tags date: * +0000 files: .hgtags (glob)
  |
  o  3 nice day date: * -1000 files: letter .txt (glob)
  |
  o  2 world date: * -1000 files: letter .txt (glob)
  |
  o  1 hello date: * -1000 files: letter .txt (glob)
  |
  o  0 init projB date: * -1000 files: (glob)
  
  $ hg tags -q
  tip
  v0.2
  v0.1
  $ cd ..

Test filemap
  $ echo 'include letter2.txt' > filemap
  $ hg convert --filemap filemap "$SVNREPOURL/proj%20B/mytrunk" fmap
  initializing destination fmap repository
  scanning source...
  sorting...
  converting...
  5 init projB
  4 hello
  3 world
  2 nice day
  1 second letter
  0 work in progress
  $ hg -R fmap branch -q
  default
  $ hg log -G -R fmap --template '{rev} {desc|firstline} files: {files}\n'
  o  1 work in progress files: letter2.txt
  |
  o  0 second letter files: letter2.txt
  
Convert with --full adds and removes files that didn't change

  $ cd B
  $ echo >> "letter .txt"
  $ svn ci -m 'nothing' | filter_svn_output
  Sending        letter .txt
  Transmitting file data .
  Committed revision 9.
  $ cd ..

  $ echo 'rename letter2.txt letter3.txt' > filemap
  $ hg convert --filemap filemap --full "$SVNREPOURL/proj%20B/mytrunk" fmap
  scanning source...
  sorting...
  converting...
  0 nothing
  $ hg -R fmap st --change tip
  A letter .txt
  A letter3.txt
  R letter2.txt

test invalid splicemap1

  $ cat > splicemap <<EOF
  > $INVALIDREVISIONID $VALIDREVISIONID
  > EOF
  $ hg convert --splicemap splicemap "$SVNREPOURL/proj%20B/mytrunk" smap
  initializing destination smap repository
  abort: splicemap entry svn:x2147622-4a9f-4db4-a8d3-13562ff547b2/proj%20B/mytrunk@1 is not a valid revision identifier
  [255]

Test stop revision
  $ hg convert --rev 1 "$SVNREPOURL/proj%20B/mytrunk" stoprev
  initializing destination stoprev repository
  scanning source...
  sorting...
  converting...
  0 init projB
  $ hg -R stoprev branch -q
  default

Check convert_revision extra-records.
This is also the only place testing more than one extra field in a revision.

  $ cd stoprev
  $ hg tip --debug | grep extra
  extra:       branch=default
  extra:       convert_revision=svn:........-....-....-....-............/proj B/mytrunk@1 (re)
  $ cd ..

Test converting empty heads (issue3347).
Also tests getting logs directly without debugsvnlog.

  $ svnadmin create svn-empty
  $ svnadmin load -q svn-empty < "$TESTDIR/svn/empty.svndump"
  $ hg --config convert.svn.trunk= --config convert.svn.debugsvnlog=0 convert svn-empty
  assuming destination svn-empty-hg
  initializing destination svn-empty-hg repository
  scanning source...
  sorting...
  converting...
  1 init projA
  0 adddir
  $ hg --config convert.svn.trunk= convert "$SVNREPOURL/../svn-empty/trunk"
  assuming destination trunk-hg
  initializing destination trunk-hg repository
  scanning source...
  sorting...
  converting...
  1 init projA
  0 adddir

Test that a too-new repository format is properly rejected:
  $ mv svn-empty/format format
  $ echo 999 > svn-empty/format
It's important that this command explicitly specify svn, otherwise it
can have surprising side effects (like falling back to a perforce
depot that can be seen from the test environment and slurping from that.)
  $ hg convert --source-type svn svn-empty this-will-fail
  initializing destination this-will-fail repository
  file:/*/$TESTTMP/svn-empty does not look like a Subversion repository to libsvn version 1.*.* (glob)
  abort: svn-empty: missing or unsupported repository
  [255]
  $ mv format svn-empty/format

enable svn subrepos

  $ cat >> $HGRCPATH <<EOF
  > [subrepos]
  > svn:allowed = true
  > EOF

try converting when we have an svn subrepo and a merge in hg superrepo (issue5657)

  $ cd "$TESTTMP"
  $ hg init withmerge
  $ cd withmerge
  $ echo "subrepo = [svn]$SVNREPOURL" >.hgsub
  $ hg add .hgsub
  $ svn checkout "$SVNREPOURL" subrepo | sort
  A    subrepo/proj B
  A    subrepo/proj B/mytrunk
  A    subrepo/proj B/mytrunk/letter .txt
  A    subrepo/proj B/mytrunk/letter2.txt
  A    subrepo/proj B/tags
  A    subrepo/proj B/tags/v0.1
  A    subrepo/proj B/tags/v0.1/letter .txt
  A    subrepo/proj B/tags/v0.2
  A    subrepo/proj B/tags/v0.2/letter .txt
  A    subrepo/proj B/tags/v0.2/letter2.txt
  Checked out revision 9.
  $ hg ci -m "Adding svn subrepo"
  $ touch file1.txt
  $ hg add file1.txt
  $ hg ci -m "Adding file1"
  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ touch file2.txt
  $ hg add file2.txt
  $ hg ci -m "Adding file2"
  created new head
  $ hg merge 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -m "merged"
  $ cd ..
  $ hg --config extensions.convert= convert withmerge withmerge-converted
  initializing destination withmerge-converted repository
  scanning source...
  sorting...
  converting...
  3 Adding svn subrepo
  2 Adding file1
  1 Adding file2
  0 merged
  $ cd withmerge-converted
  $ hg up | sort
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  A    subrepo/proj B
  A    subrepo/proj B/mytrunk
  A    subrepo/proj B/mytrunk/letter .txt
  A    subrepo/proj B/mytrunk/letter2.txt
  A    subrepo/proj B/tags
  A    subrepo/proj B/tags/v0.1
  A    subrepo/proj B/tags/v0.1/letter .txt
  A    subrepo/proj B/tags/v0.2
  A    subrepo/proj B/tags/v0.2/letter .txt
  A    subrepo/proj B/tags/v0.2/letter2.txt
  Checked out revision 9.
  $ ls
  file1.txt
  file2.txt
  subrepo