diff -r 668eff08387f -r 675775c33ab6 contrib/python-zstandard/zstd/compress/zstdmt_compress.h
--- a/contrib/python-zstandard/zstd/compress/zstdmt_compress.h	Thu Apr 04 15:24:03 2019 -0700
+++ b/contrib/python-zstandard/zstd/compress/zstdmt_compress.h	Thu Apr 04 17:34:43 2019 -0700
@@ -28,6 +28,16 @@
 #include "zstd.h"            /* ZSTD_inBuffer, ZSTD_outBuffer, ZSTDLIB_API */
 
 
+/* ===   Constants   === */
+#ifndef ZSTDMT_NBWORKERS_MAX
+#  define ZSTDMT_NBWORKERS_MAX 200
+#endif
+#ifndef ZSTDMT_JOBSIZE_MIN
+#  define ZSTDMT_JOBSIZE_MIN (1 MB)
+#endif
+#define ZSTDMT_JOBSIZE_MAX  (MEM_32bits() ? (512 MB) : (1024 MB))
+
+
 /* ===   Memory management   === */
 typedef struct ZSTDMT_CCtx_s ZSTDMT_CCtx;
 ZSTDLIB_API ZSTDMT_CCtx* ZSTDMT_createCCtx(unsigned nbWorkers);
@@ -52,6 +62,7 @@
 ZSTDLIB_API size_t ZSTDMT_initCStream(ZSTDMT_CCtx* mtctx, int compressionLevel);
 ZSTDLIB_API size_t ZSTDMT_resetCStream(ZSTDMT_CCtx* mtctx, unsigned long long pledgedSrcSize);  /**< if srcSize is not known at reset time, use ZSTD_CONTENTSIZE_UNKNOWN. Note: for compatibility with older programs, 0 means the same as ZSTD_CONTENTSIZE_UNKNOWN, but it will change in the future to mean "empty" */
 
+ZSTDLIB_API size_t ZSTDMT_nextInputSizeHint(const ZSTDMT_CCtx* mtctx);
 ZSTDLIB_API size_t ZSTDMT_compressStream(ZSTDMT_CCtx* mtctx, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
 
 ZSTDLIB_API size_t ZSTDMT_flushStream(ZSTDMT_CCtx* mtctx, ZSTD_outBuffer* output);   /**< @return : 0 == all flushed; >0 : still some data to be flushed; or an error code (ZSTD_isError()) */
@@ -60,16 +71,12 @@
 
 /* ===   Advanced functions and parameters  === */
 
-#ifndef ZSTDMT_JOBSIZE_MIN
-#  define ZSTDMT_JOBSIZE_MIN (1U << 20)   /* 1 MB - Minimum size of each compression job */
-#endif
-
 ZSTDLIB_API size_t ZSTDMT_compress_advanced(ZSTDMT_CCtx* mtctx,
                                            void* dst, size_t dstCapacity,
                                      const void* src, size_t srcSize,
                                      const ZSTD_CDict* cdict,
                                            ZSTD_parameters params,
-                                           unsigned overlapLog);
+                                           int overlapLog);
 
 ZSTDLIB_API size_t ZSTDMT_initCStream_advanced(ZSTDMT_CCtx* mtctx,
                                         const void* dict, size_t dictSize,   /* dict can be released after init, a local copy is preserved within zcs */
@@ -84,8 +91,9 @@
 /* ZSTDMT_parameter :
  * List of parameters that can be set using ZSTDMT_setMTCtxParameter() */
 typedef enum {
-    ZSTDMT_p_jobSize,           /* Each job is compressed in parallel. By default, this value is dynamically determined depending on compression parameters. Can be set explicitly here. */
-    ZSTDMT_p_overlapSectionLog  /* Each job may reload a part of previous job to enhance compressionr ratio; 0 == no overlap, 6(default) == use 1/8th of window, >=9 == use full window. This is a "sticky" parameter : its value will be re-used on next compression job */
+    ZSTDMT_p_jobSize,     /* Each job is compressed in parallel. By default, this value is dynamically determined depending on compression parameters. Can be set explicitly here. */
+    ZSTDMT_p_overlapLog,  /* Each job may reload a part of previous job to enhance compressionr ratio; 0 == no overlap, 6(default) == use 1/8th of window, >=9 == use full window. This is a "sticky" parameter : its value will be re-used on next compression job */
+    ZSTDMT_p_rsyncable    /* Enables rsyncable mode. */
 } ZSTDMT_parameter;
 
 /* ZSTDMT_setMTCtxParameter() :
@@ -93,12 +101,12 @@
  * The function must be called typically after ZSTD_createCCtx() but __before ZSTDMT_init*() !__
  * Parameters not explicitly reset by ZSTDMT_init*() remain the same in consecutive compression sessions.
  * @return : 0, or an error code (which can be tested using ZSTD_isError()) */
-ZSTDLIB_API size_t ZSTDMT_setMTCtxParameter(ZSTDMT_CCtx* mtctx, ZSTDMT_parameter parameter, unsigned value);
+ZSTDLIB_API size_t ZSTDMT_setMTCtxParameter(ZSTDMT_CCtx* mtctx, ZSTDMT_parameter parameter, int value);
 
 /* ZSTDMT_getMTCtxParameter() :
  * Query the ZSTDMT_CCtx for a parameter value.
  * @return : 0, or an error code (which can be tested using ZSTD_isError()) */
-ZSTDLIB_API size_t ZSTDMT_getMTCtxParameter(ZSTDMT_CCtx* mtctx, ZSTDMT_parameter parameter, unsigned* value);
+ZSTDLIB_API size_t ZSTDMT_getMTCtxParameter(ZSTDMT_CCtx* mtctx, ZSTDMT_parameter parameter, int* value);
 
 
 /*! ZSTDMT_compressStream_generic() :
@@ -129,7 +137,7 @@
 
 /*! ZSTDMT_CCtxParam_setMTCtxParameter()
  *  like ZSTDMT_setMTCtxParameter(), but into a ZSTD_CCtx_Params */
-size_t ZSTDMT_CCtxParam_setMTCtxParameter(ZSTD_CCtx_params* params, ZSTDMT_parameter parameter, unsigned value);
+size_t ZSTDMT_CCtxParam_setMTCtxParameter(ZSTD_CCtx_params* params, ZSTDMT_parameter parameter, int value);
 
 /*! ZSTDMT_CCtxParam_setNbWorkers()
  *  Set nbWorkers, and clamp it.